334 Morehead City, NC 252.638.3553 bluewatersupply.com Paint Paint No.1 Foul release coating for propellers & running gear PropOne is a non-biocidal coating which prevents sea life adhering to propellers and underwater running gear. With thousands of proven applications each year, PropOne will save you time andmoney. 1 Litre Kit PROP 2044 Coverage: 2 x 48 inch propellers + running gear 2 x 240 mL Primer Coat 2 x 60 mL Primer Activator 1 x 400 mL Clear Coat 500mL Kit PROP 2046 Coverage: 2 x 36 inch propellers + running gear 2 x 120 mL Primer Coat 2 x 30 mL Primer Activator 1 x 200 mL Clear Coat 250mL Kit PROP 2050 Coverage: 2 x 24 inch propellers 1 x 120 mL Primer Coat 1 x 30 mL Primer Activator 1 x 100 mL Clear Coat PropOne kits: technical information Prop Wash 250mL bottle PROP 2038 Prop Wash 1 Litre bottle PROP 2039 Metal cleaner to remove contamination prior to application of PropOne ULC Underwater Light Coating: 70mL PROP 2059 Clear coat specifically for underwater lights 75ft2 per 70mL Paint Stripper: 200mL PROP 2010 Removes old PropOne Primer 32ft2 per 200mL Silicone Remover: 200mL PROP 2011 Softens and removes old PropOne Clear Coat 32ft2 per 200mL 18”-24” 24”-36” 36”-48” 3 or 4 blades 4 or 5 blades 5 blades One propeller 250mL Kit 500mL Kit 500mL Kit Two propellers 250mL Kit 500mL Kit 1 Litre Kit Two propellers, two rudders, two propeller shaft struts 500mL Kit 500mL Kit 1 Litre Kit Two propellers, two rudders, two propeller shaft struts & two trim tabs 500mL Kit 1 Litre Kit 1 Litre Kit Drying Time Minimum conditions of application: 50 ° F, 55% RH. Minimum time before immersion Lower temperatures or humidity will extend cure time. 68 ° F: 12 hours, 55% RH. 50 ° F: 16 hours, 55% RH. There is no maximum time before immersion, only a minimum time. Determine which PropOne kit will be needed for your application See prop-one.com for more information
RkJQdWJsaXNoZXIy MzI5NTg=