Morehead City, NC 252.638.3553 bluewatersupply.com 22 Construction & Repair Laminating Consumables Construction & Repair Laminating Consumables | Tape | General Purpose Tape PRO-VAC PV-80 General Purpose Sealant Tape is designed for vacuum infusion, wet layup, and bag-to-bag (envelope bagging) processes. It performs best at room temperature ,+68°F, and has a maximum use temperature of 302°F. If the tape is too cold the tack levels will be dramatically reduced. Compatible with most vacuum films and tool surfaces. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 50’ BWS Part Number Description Price PVAC PV-80-3 General Purpose Sealing Tape - 1/2” x 50’ $21.14 Laminating Consumables | Tape | PSA Tape PRO-VAC Pro-Vac Pressure Sensitive Multipurpose tape is an economical pressure sensitive tape intended for use vin vacuum infusion, wet lay-up bagging, and bag-to-bag (envelope bagging) processes. It is blue for easy identification in the mold. This tape is a silicone adhesive on a polyester backing that performs best at room temperature and has a maximum use temperature of 356°F. If the tape is too cold the tack levels will be dramatically reduced. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 72 Yards BWS Part Number Description Price PVAC PV-25-25 Pressure Sensitive Multipurpose Tape - 1” x 72 Yards $36.48 PVAC PV-25-50 Pressure Sensitive Multipurpose Tape - 2” x 72 Yards $84.86 Laminating Consumables | Tape | Flash Tape Construction & Repair Flash Tape 1 is designed for all phases of masking operations where no residue can be tolerated. It is perfect for holding release films, and fabrics, bleeders and breathers, metal and composite details in place during pre-fit and pre-bond operations. It is highly recommended for long term temperature exposures over 350°F. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 72 Yards BWS Part Number Description Price NORT TP-FLASH1-100-GRT 1” Flash Tape 1, Blue - 72 Yards $21.13 NORT TP-FLASH1-200-NC 2” Flash Tape 1, Blue - 72 Yards $41.14 Laminating Consumables | Tape | Double Faced Rowley Double faced adhesive tape is Ideal for holding fabric to vertical slats, wood, metal, or etc. The high strength adhesive is not affected by sunlight or temperature. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 60 Yards BWS Part Number Description Price RWLY DF75 Double Faced Adhesive Tape - 3/4” x 60 Yards $49.75 RWLY DF100 Double Faced Adhesive Tape - 1” x 60 Yards $64.98 Laminating Consumables | Release Agent Construction & Repair PV-6 is a film forming agent that serves as a sealer and release agent in liquid form. The resulting release film dries immediately and polymerizes quickly. PV-6 can be applied when the relative humidity is high and the ambient temperature is low. It will bond to and develop a release film in spite of the moisture contents of any substrate or surface. Thus, PV-6 can be sprayed over plaster, clay, wood varnish and shellac surfaces that may contain moisture. • One (1) Ordering Unit is: Each • Minimum Order Quantity: Gallon BWS Part Number Description Price FIN PV-6/GL Mold Release Agent, Spray or Brush - 1 Gallon $199.85 Laminating Consumables | Release Agent | Partall Paste Construction & Repair Partall® Paste #2, the original green wax, is an economical paste wax mold release formulated with hydrocarbon and microcrystalline waxes. Designed as a general purpose mold release agent on fiberglass and metal molds where standard silicone wax releases cannot be tolerated. It may also be used as a prime coat for PVA coatings, such as Partall® Film #10 and Partall® Coverall Film. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Tub = 7 lb. BWS Part Number Description Price BWS REXPW27 Partall® Paste #2 - 7 lb. $97.02
RkJQdWJsaXNoZXIy MzI5NTg=