SM Tropikote™ Hard, modified epoxy antifouling Protection in extreme tropical conditions 75.8% Cuprous Oxide (Highest in the Industry) Sharkskin™ High performance hard modified epoxy 45.2% Cuprous Oxide Consistent viscosity - better flow & rolling ability Islands 77 Plus™ Dual-Biocide Highest Grade of Cuprous Oxide and Zinc Omadine Available Tin-Free Multi-Season Performance Consistent viscosity - better flow & rollability Harder self-polishing polymer binding system Islands 44 TF™ Applies directly over tin-based paints Tin-free multi-season performance Highest grade of cuprous oxide available keeps barnacles away 32.7% Cuprous Oxide Econea biocide fights both hard and soft growth Lloyd’s Register Certified Lloyd’s Register Certified 1241 Sur face Tolerant Epoxy Coating System™ Surface tolerant formulation, reduces surface preparation time and cost Low temperature cure expands application window (to 0°F, -18°C) Quick drying provides fast re-coating Low VOC formulation complies with rigid VOC limits Ideal for steel and aluminum hulls 1241 Base and Catalysts sold separately Aluma Hawk™ Ideal for pontoons, jon boats & house boats Rust-inhibiting Topcoat and/or primer on raw aluminum, fiberglass & other substrates Safe for fresh or saltwater submersion Catalyst selection: • 1241C Catalyst • 1241CS Slow Cure Catalyst Download Technical and Safety Data Sheets at: www.SeaHawkPaints.com/sdss-tdss NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com (Page 1 of 2) COLORKOTE™ Technical Data Sheet Triple-Biocide 4900 Series Maximum Performance for All Vessels • Triple Biocide Antifouling Power • Vibrant Colors • Multi-season performance in fresh, brackish and saltwater conditions • Compatible with all hull types – including aluminum PRODUCT INFORMATION Colors: Bright White 4910, 4905 Deep Black, Blue 4902, Red 4901, Green 4903, Yellow 4904 Finish/Sheen: Semi-Gloss Volume Solids: 53% (±2) Solids by Weight: 71% (±2) Shipping Weight: Bright White - 12.46 Lbs/Gal (5.65 kg/Gal) Deep Black - 12.27 Lbs/Gal (5.56 kg/Gal) Blue - 11.63 Lbs/Gal (5.27 kg/Gal) Red - 11.24 Lbs/Gal (5.09 kg/Gal) Green - 11.74 Lbs/Gal (5.32 kg/Gal) Yellow - 11.22 Lbs/Gal (5.08 kg/Gal) *All colors may not be available in all states Flash Point: 86.2°F/30.1°C VOC: 330 Grams/Liter Film Thickness: 3.8 mils wet equals 2 mils dry per coat Theoretical Coverage: 425 Sq Ft/Gal (39.48 m2/Gal) FEATURES & BENEFITS • Triple biocide antifouling power – Econea*, Zinc Omadine, Copper Thiocyanate • 6 vibrant colors that can be mixed to create thousands of custom colors • Multi-season performance in fresh, brackish and saltwater conditions • California Air Quality Compliant - 330 grams per liter VOC • Compatible with all hull types - fiberglass, aluminum and steel/iron APPLICATION CONTROLS Method: Spray, rollers and brushes Induction / Sweat-in Time: 0 Thinner: 2053 Cleaner: 2031 PRODUCT DESCRIPTION Ablative, self-polishing antifoulant with Vibrant Colors designed for use on Aluminum Hull vessels but also can be used on Fiberglass, Wood and Steel. This product controls barnacles, algae, and other marine organisms. It can be used in both fresh and salt water. This product has a copolymer, biocide release mechanism. The product prevents coating buildup and is able to be hauled for extended periods and then relaunched without affecting the antifouling properties. Revision date: October 2020 NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com TUFF STUFF™ Item #1284 & #1285 Technical Data Sheet High Build Epoxy Primer Microsheet Silicate Technology Superior Blister Prevention & Repair • Highest Build Epoxy Primer • Extremely Durable • Easy Application, Longer Windows • Fewer Coats Needed PRODUCT INFORMATION Colors: Light Gray-1284, White- 1285 Finish/Sheen: Matte Volume Solids: 52% +\- 2% Available Sizes: 1/2-Gallon Kit (2 quarts), 2-Gallon Kit (2 gallons) Shipping Weight: 22 Lbs. (9.97 kg)/2 Gallon Kit Mix Ratio: 1:1 Side A, Side C Induction Time: 20-30 minutes Flash Point: 80° F (26.66° C) VOC: 444 Grams/Liter Typical Film Thickness: 6-7.5 mils (152.4-190.5 µ) dry film thickness (DFT) per coat, (11.5-14.5 mils (292.1-368.3 µ) wet film thickness (WFT)) Recommended Coats: 2-4 depending on intended service Theoretical Coverage: 140 Sq.Ft. (13 m2)/Gal. @ 6.0 mils (152.4 µ) DFT FEATURES & BENEFITS • Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coat. • Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead – above and below the waterline. • Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units • Highest build epoxy – Fewer coats needed • Longer window between coats makes Tuff Stuff easy to use • Reduced labor and less haul out time PRODUCT DESCRIPTION Tuff Stuff is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff is effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration. Revision date: April 2019 (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com (Page 1 of 3) BIOCOP TF™ Technical Data Sheet Advanced Dual Biocide 1200-1 Series Maximum Performance for All Vessels • Advanced dual biocide PL3 release technology • Maximum protection available • 38.06% Cuprous Oxide • Multi-season protection • TBT-Free – Lloyd’s Registry certified PRODUCT INFORMATION Colors: Red 1201-1, Light Blue 1202-1, Black 1205-1, Dark Blue 1230-1, Gray 1231-1, Green 1234-1 Finish/Sheen: Semi-Gloss Biocide Content: 4.14% (78 g/l) Copper Content: 38.06% (717 g/l) all colors Volume Solids: 57% (±2) Solids by Weight: 80% (±2) Shipping Weight: Black - 15.76 Lbs/Gal (7.15 kg/Gal) Blue - 15.76 Lbs/Gal (7.15 kg/Gal) Red - 15.76 Lbs/Gal (7.15 kg/Gal) Dark Blue - 16.0 Lbs/Gal (7.257 kg/Gal) Green - 15.76 Lbs/Gal (7.15 kg/Gal) Gray - 17.45 Lbs/Gal (7.915 kg/Gal) Teal - 15.67 Lbs/Gal (7.107 kg/Gal) *All colors are not available in all states Flash Point: 100°F (38°C) VOC: 377 Grams/Liter Typical Film Thickness: Pleasure craft: 3.0 mils (76.2 µ) dry film thickness(DFT) per coat, (5.3 mils (134.62 µ) wet film thickness(WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 3.0 mils (76.2 µ) dry film thickness (DFT) per coat, (5.3 mils (134.62 µ) wet film thickness (WFT)), 2 coats on entire hull. Commercial Marine: 4.0-5.0 mils (101.6-127 µ) DFT per coat by spray application (7.0-8.8 mils (177.8-223.52 µ) WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Theoretical Coverage: 315 Sq.Ft./Gal. (29.2645 m2) @ 2.9 mils (73.66 µ) DFT. FEATURES & BENEFITS PRODUCT DESCRIPTION Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system “PL3” produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. Revision date: April 2019 Has no antifouling characteristics Islands Dual-Biocide Antifouling Hard Modified Epoxy Antifouling Surface Tolerant Epoxy Coating Aluminum Boat Paint Black 2145 Dark Blue 2140 Red 6141 Blue 2142 Blue 6142 Green 2143 Green 6143 Dark Blue 6140 Black 6145 Black 7745 Black 1005TF Red 7741 Red 1001TF Blue 7742 Blue 1002TF Green 7733 Teal 1035TF Dark Blue 7730 Dark Blue 1030TF Gray 1241 Black AH7005 Aluminum Gray AH7031 Jon Boat Blue AH7002 Jon Boat Tan AH7050 White AH7010 Jon Boat Green AH7033 Gray 7731
RkJQdWJsaXNoZXIy MzI5NTg=