Morehead City, NC 252.638.3553 bluewatersupply.com Quality Products Exceptional Service VOLUME VII
® MARINE COATINGS axalta.us/marine 1.855.6.AXALTA ©2022 Axalta Coating Systems. All rights reserved. An Axalta Coating Systems Brand SIMPLY THE BEST Axalta’s marine coatings are a complete system of premium quality products, featuring Imron® polyurethanes, scientifically engineered to deliver the industry’s best appearance, performance, and corrosion protection. Trusted by the finest boat builders in the world
1 Phone & Fax phone: 252-638-3553 | fax: 252-638-3144 Business Hours Mon – Fri | 8:30am – 5:00pm Address 310 Friendly Road P.O. Box 325 Morehead City, NC 28557 Visit our web site www.bluewatersupply.com Please ask your Bluewater Supply representative about getting an e-commerce account set up today. Place orders, check stock and prices, review invoices and many other functions to make purchasing and managing your account easier. Catalog Volume VII Quality Products and Exceptional Service 2023 Holiday Closing Schedule Our office and operations will be closed on the following holidays observed by Bluewater Supply: Memorial Day Monday, May 29, 2023 Independence Day Tuesday, July 4, 2023 Labor Day Monday, September 4, 2023 Thanksgiving Thursday, November 23, 2023 – Friday, November 24, 2023 Christmas/New Year Friday, December 22, 2023 – January 01, 2024
2 Morehead City, NC 252.638.3553 bluewatersupply.com Contact for new accounts, catalogs, and literature requests [email protected] Contact for orders, checking stock, pricing, return requests, and general customer service [email protected] 252-638-3553 Contact for inquiries about an account, price discrepancy, and accounting questions [email protected] 252-638-3553 Remit to address for paying invoices PO Box 325 Morehead City, NC 28557 Bluewater Contacts Order Fulfillment Information Bluewater Supply seeks to deliver your orders in the most timely fashion possible. Please take a moment to review our processing and delivery standards to ensure your expectations are met. Local Delivery Routes (Eastern North Carolina) All orders placed by 5:00 pm EST Monday - Thursday will be delivered the following day. All orders placed by 3:00 pm EST on Friday will be delivered the following Monday. Freight Shipments All orders must be received by 2:00 pm EST for same-day processing and shipment. UPS Shipments All orders must be received by 2:00 pm EST for same-day processing and shipment. Custom Mixed Paint Shipments Custom mixed paint orders must be entered by 12:00 pm EST to ensure next day delivery. Please contact our office or your sales representative to inquire more about custom mixed paint.
3 Terms & Conditions Wholesale Accounts Bluewater Supply sells its products and provides service to approved wholesale professionals, manufacturers and contractors. Accounts may be available to other approved customers if approved by Bluewater Supply. In order to be eligible for a wholesale account the customer must have a place of business and address. Wholesale trade recognition will be determined by a full explanation of your type and place of business and a valid tax id. Sales Tax will be charged to any customer without a valid tax exempt certificate. COD or Terms Accounts Bluewater Supply has two types of accounts, COD and Open Account. Please let us know the type of account that is preferred and Bluewater will provide the appropriate application. Open Account Terms Bluewater Supply payment terms are Net 30. After 15 days past due the balance is subject to a 1.5% finance charge. Shipping & Delivery Bluewater Supply will deliver to those customers at no charge on the designated routes. If a customer is located outside of our regular delivery area we will determine the best way to meet that customer’s delivery needs through UPS or motor freight. Freight Damage If there is any damage to product while in transit it is the responsibility of the carrier. If there is damage, an explanation should be written on the freight document and immediately filled with the freight company not with Bluewater Supply. Order Minimums There are no minimum order requirements for customers on scheduled delivery routes, however in order to qualify for no charge delivery within our delivery area, minimum yearly volumes and/or order amounts are necessary. Non Stock Orders Customers will be required to pay freight from the manufacturer on non stock special orders. Returned Goods Policy Bluewater Supply offers a 60 day return policy from the date of delivery under the guidelines detailed below: 1. Unused product requires written permission to be obtained by the Purchaser in advance, and a return authorization letter will be issued to the buyer. Product must be in new and resalable condition for credit. 2. The return of any product shipped in error by Bluewater Supply will require that a return authorization letter be issued in advance and accompany the order. All shipping arrangements and costs will be borne by Bluewater Supply for these returns. 3. All approved returns for product that was NOT shipped in error by Bluewater Supply must be shipped prepaid by the Buyer and delivered to our Morehead City location, and must be properly packaged by Buyer. Substitute for original box must be of a similar durability to the original box and must fully protect the item in transit. All material must be in the original carton and resalable. 4. Used Product or custom Product is not returnable except for warranty purposes. Custom product is defined as unique configuration for one customer. 5. Product returns, which are not approved, do not include the return authorization letter, are damaged due to improper packaging, or are not prepaid, will not be accepted by Bluewater Supply. 6. All credit will be issued at full invoiced price. 7. Non-Stock Special Orders may not be returnable. If the Manufacturer will accept the return a Manufacturer’s restocking fee may apply. Bluewater Supply Warranty: Bluewater Supply is an authorized distributor for nationally recognized manufacturer’s producing goods for the marine industry. Many of the products distributed by Bluewater Supply are warranted by the manufacturer. A copy of each manufacturer’s warranty is available upon request. As a distributor, Bluewater Supply assumes no liability for the use of any item manufactured by others, and offers no warranty, either expressed or implied, for such products. Prices All prices in the Bluewater Supply catalog are subject to change without notice. Credit Cards Bluewater Supply accepts the following credit cards: Visa, Mastercard, and American Express General Terms and Condition Bluewater Supply is herein referred to as “The Company”. 1. All products are shipped F.O.B shipping point unless otherwise specified. The risk for all damages, destruction or loss of the products shall pass to Purchaser at the shipping point. The prices quoted exclude all applicable taxes, duties, tariffs, fees, levies, penalties and other charges imposed by governmental authorities with respect to the production, sale or delivery of the products, all of which shall be paid by Purchaser. 2. Claims for shortages, losses, and apparent or concealed damages sustained in transit, shall be made by the purchaser with the carrier. 3. Shipping dates are approximate and are dependent upon prompt receipt of all necessary information to The Company from Purchaser. The Company shall not be liable for late delivery due to fire, strike, civil or military authority, insurrection or riot, unavailability of material or parts and for other causes beyond its reasonable control, and The Company shall not be liable for incidental or consequential damages arising from late delivery. 4. The parties hereto acknowledge and agree that the Purchaser will pay the entire purchase price per The Company terms of sale as listed on each invoice and these Terms and Conditions. In the event the Purchaser defaults, The Company shall charge and collect a service charge of 1.5% per month of the unpaid contract price. The Company shall also be entitled to all costs of collection including courts costs and attorney’s fees in the event of the default by the Purchaser 5. No terms or conditions or purchase orders and/or contracts different from the terms of The Company will become a part of any sales agreement, purchase order, or other document(s) unless specifically approved in a separate writing by The Company. 6. The Purchaser agrees to provide The Company upon request a statement representing that the Purchaser is and remains solvent. 7. The Company will extend to the Buyer all transferable warranties made to TheCompany by themanufacturers or suppliers of materials.
THE COMPANY MAKES AND GIVES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, AND IT IS EXPRESSLY UNDERSTOOD THAT IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES ARE SPECIFICALLY EXCLUDED WITH RESPECT TO ANY AND ALL GOODS, MATERIALS OR SERVICES FURNISHED BY THE COMPANY. This general warranty policy supersedes any other warranties contained in plans for specifications on which a quotation or proposal from The Company may be based and cannot be expanded without the prior and specific written consent of The Company. 8. THE COMPANY SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES, SUCH AS BUT NOT LIMITED TO DAMAGES OR LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASES OR REPLACEMENT GOODS OR CLAIMS OF CUSTOMERS OF PURCHASER FOR SERVICE INTERRUPTIONS. ANY REMEDY OF PURCHASER SHALL SOLELY BE WITH RESPECT TO ANY WARRANTY EXTENDED BY THE MANUFACTURER. THE REMEDY OF THE PURCHASER SET FORTH HEREIN IS EXCLUSIVE, AND THE LIABILITY OF THE COMPANY WITH THE RESPECT TO ANY CONTRACT, OR ANY THING DONE IN CONNECTION THEREWITH SUCH AS THE PERFORMANCE OR BREACH THEREOF, OR FROM THE SALE, DELIVERY, RESALE, INSTALLATION OR USE OF ANY GOODS SOLD, WHETHER ARISING OUT OF ANY CONTRACT, NEGLIGENCE, STRICT TORT, OR UNDER ANY WARRANTY OR OTHERWISE, SHALL NOT EXCEED THE PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED. 9. It is expressly understood that the title to property shall not pass to the Purchaser but shall remain vested in and be the property of The Company, or its assigns, until the payment of the purchase price and late charge, and the performance of all the conditions and stipulations of the Application have been met. No agreement for any extension of time or postponement of any payment shall be valid unless in writing signed by an officer of The Company. It is expressly agreed that the property shall be and remain strictly personal property and retain its character as such, no matter in what manner it may be affixed or attached to any building or structure.. 10. For the purpose of enforcing The Company’s rights, the Purchaser authorizes The Company to enter on the Purchaser’s premises, with or without notice, and remove the property, and hereby waives any action, or rights of action, arising out of such entry and repossession. 11. Applicant agrees that venue for any legal proceeding regarding this Agreement shall be commenced and maintained exclusively in the state or federal courts in Guilford County, North Carolina, and Purchaser submits to the exclusive jurisdiction thereof. 12. When this document is confirming the Purchaser’s verbal acceptance, exceptions must be communicated to The Company within 10 calendar days after the date of this notice or the quote is deemed to be accepted by the Purchaser. 13. The Company and Purchaser agree that The Company may assign all its right, title and interest in the account created hereby including, without limitation, its collection remedies and Purchaser shall attorn to such assignee. 14. THIS AGREEMENT CONSTITUTES THE ENTIRE AGREEMENT BETWEEN THE PARTIES, AND MAY NOT BE ALTERED EXCEPT IN WRITING SIGNED BY AN OFFICER OF THE COMPANY AND THE PURCHASER AND SHALL BE CONSTRUED PER THE LAWS OF THE STATE OF NORTH CAROLINA WITHOUT REGARD TO ITS CONFLICT OF LAWS RULES. 15. An order may be cancelled by Purchaser only if agreed to by The Company, as determined by The Company in its sole discretion and upon payment of reasonable charges based upon expenses already incurred and commitments made by The Company in its sole discretion. Bluewater Supply (the “Company”) makes no assurance or guaranty regarding any amount of credit or the continuation of such credit to the applicant. If the Company, in its sole discretion, provides applicant with a line of credit to facilitate purchases of product and/or other business transactions with the Company, such credit line may be amended, decreased or terminated at any time at the Company’s sole discretion. If such credit is provided to the applicant, the applicant will provide to the Company any or all annual reports containing the applicant’s audited consolidated financial statements for the a particular fiscal year or other applicable financial information, as requested by the Company. If the Company determines, in its sole discretion, that the credit worthiness or future performance of the applicant is impaired or unsatisfactory, the Company may (i) suspend delivery of products, (ii) require payment by wire transfer of immediately available funds prior to the scheduled shipment of the products and/or (iii) require cash, letter(s) of credit, guarantees or other security acceptable to the Company in its sole discretion. The Company may terminate any line of credit provided as a result of this application to applicant at any time. © Copyright 2023 Bluewater Supply All rights reserved. No part of this catalog may be reproduced without the express written permission of Bluewater Supply. Catalog Credits Lead Editor | Tiffany Wade Designer & Editor | Josh Lamb Technical Assistant | Magnus Thiersmann Creative Director | Jason Pim Managing Editor | Robin Anderson Cover Photo | Grace Bell, Big Rock Blue Marlin Tournament Bluewater Supply would like to thank Tiffany Wade for her role as Editor of the 2023 catalog. We would also like to thank the entire staff of Bluewater Supply with special thanks to Karyn Stone, Jason Hillard and Mike Foley. 4
Alphabetical Index Vendor Index Part Number Index Table of Contents Construction & Repair Electrical Hardware Lighting Maintenance Paint Plumbing Safety Underwater Hardware 6-39 40-115 116-141 142-162 163-287 288-327 328-358 359-371 372-375 376-393 394-431 432-444 Quick Flip Product Guide Reference Charts 338-339 118 324 74-75 302-307 318-321 447 5 253 448 27-31
Construction & Repair
8 Morehead City, NC 252.638.3553 bluewatersupply.com Composite Materials Construction & Repair Construction & Repair Composite Materials | Fiberglass Multiaxial Knits | No Chop Saertex Saertex fabrics made of glass fiber, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. Saertex products are individually configured for our customers and optimally adapted to a range of processes: vacuum infusion, RTM, pultrusion, prepreg, compression, etc. Is also compatible with EP, VE, PE resins. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price SRTX MP-E1700 17 oz. +45/-45, No Chop - 50” x 95 Yards $1,349.64 SRTX UN-E1800 18 oz. 0/90, No Chop - 50” x 95 Yards $1,059.47 SRTX MP-E2400 24 oz. +45/-45, No Chop - 50” x 95 Yards $1,118.29 Composite Materials | Fiberglass Multiaxial Knits | With Chop Saertex Saertex fabrics made of glass fiber, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. Saertex products are individually configured for our customers and optimally adapted to a range of processes: vacuum infusion, RTM, pultrusion, prepreg, compression, etc. Is also compatible with EP, VE, PE resins. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price SRTX CMP-E1208 12 oz. +45/-45 with 3/4 Chop - 50” x 88 Yards $2,027.15 SRTX CMP-E1708 17 oz. +45/-45 with 3/4 Chop - 50” x 88 Yards $1,063.54 SRTX CMP-E1708-4IN 17 oz. +45/-45 with 3/4 Chop - 4” x 88 Yards $50.35 SRTX CMP-E1708-6IN 17 oz. +45/-45 with 3/4 Chop - 6” x 88 Yards $113.65 SRTX CMP-E1708-8IN 17 oz. +45/-45 with 3/4 Chop - 8” x 88 Yards $149.81 SRTX CMP-E1708-10IN 17 oz. +45/-45 with 3/4 Chop - 10” x 88 Yards $180.93 SRTX UNC-E1808 18 oz. 0/90 with 3/4 Chop - 50” x 88 Yards $1,368.33 SRTX CMP-E2408 24 oz. +45/-45 with 3/4 Chop - 50” x 88 Yards $1,404.07 SRTX CMP-E3408 34 oz. Triax Warp with 3/4 Chop - 50” x 50 Yards $1,525.15 Composite Materials | Fiberglass Multiaxial Knits | Double Stitch With Chop Saertex SAERTEX fabrics made of glass fiber, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. SAERTEX products are individually configured for our customers and optimally adapted to a range of processes: vacuum infusion, RTM, pultrusion, prepreg, compression, etc. Is also compatible with EP, VE, PE resins. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price SRTX CMP-E1708-DS Double Stitch 17 oz. +45/-45 with 3/4 Chop 50” $1,144.01 Composite Materials | Fiberglass Multiaxial Knits | Stitchmat Clear Cote 2415 Stitchmat is a complex mat made up by stitchingone layer of 24 oz. glass woven roving and one layer of 1.5 oz. chopped strand mat. Stitchmat is great for quick laminate build-up and results in high strength. 2415 is an ideal fabric to use for hand lay up, boat building, and repair. It is compatible with polyester, vinyl ester, and epoxy resin systems. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price CLEAR 124265 2415 Stitchmat, 24 oz. Woven with 1.5 oz. Chop - 50” x 165lb Roll $888.02 Composite Materials | Fiberglass | Chop Strand Mat Construction & Repair Chopped strand mat is considered to be superior fiberglass reinforcement because the fibers are random, and give you strength in every direction. It can be used with epoxy or polyester resin. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price CHOP 0.75OZ .75oz.ChoppedStrandMat - 50” x88lb/Roll $648.03 CHOP 0.75OZX60 .75oz.ChoppedStrandMat - 60” x99lb/Roll $547.84 CHOP 1.5OZ 1.5oz.ChoppedStrandMat - 50” x99lb/Roll $635.49 CHOP 1.5OZ-165 1.5oz.ChoppedStrandMat-50”x165lb/Roll $787.84 CHOP 2.0OZ 2 oz. Chopped Strand Mat - 50” x 99lb/Roll $641.76
99 All prices are subject to change. Please refer to our website for most recent pricing. Construction & Repair Construction & Repair REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX products are individually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation in the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal mechanical properties or even a higher component load with the same component weight. 3 Individual drapability and outstanding permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exhibits outstanding permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing costs (fewer layers are required thanks to the higher area weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin systems: EP / UP / VE / PUR / PP / PA and caprolactam. MULTIAXIAL FABRICS MADE OF GLASS, CARBON AND ARAMID REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX products are individually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation in the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal mechanical properties or even a higher component load with the same component weight. 3 Individual drapability and outstanding permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exhibits outstanding permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing costs (fewer layers are required thanks to the higher area weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin systems: EP / UP / VE / PUR / PP / PA and caprolactam. MULTIAXIAL FABRICS ADE OF GLAS , CARBON AND ARAMID REINFORCING YOUR IDEAS I novative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and ramid, also known as NCFs (non-crimp fabrics), with more than 2,5 0 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical ch racteristics can be achieved. SAERTEX products are ind vidually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orien ation in the loading direction // Angles of betw en -22.5° and + 2.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while mainta ing equal mechanical properties or even a higher component load with the same component weight. 3 Ind vidual drapability and ou standing permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exh bits ou standing permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing co ts (fewer layers are required thanks to the higher area weight of the ind vidual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin ystems: EP / UP / VE / PUR / P / PA and caprolactam. LTIAXIAL F BRICS DE OF GLAS , CARBON ND ARAMI Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and aramid, als known as NCF (non-crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX products are individually configured for our customers and optimally adapted to a range of process s: infusion, RTM, pultrusion, prepreg, compr ssion, etc. 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation in the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal mechanical properties or even a higher component load with the same component weight. 3 Individual drapability and outstanding permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exhibits outstanding permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings ue to fewer layers Reduction of the manufacturing costs (fewer layers are required thanks to the higher area weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin systems: EP / UP / VE / PUR / PP / PA and caprolactam. ULTIAXIAL F BRI S MA E OF GLASS, CARBON AND ARAMID REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX products are individually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation in the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal echanical properties or even a higher component load with the same component weight. 3 Individual drapability and outstanding permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exhibits outstanding permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing costs (fewer layers are required thanks to the higher area weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin systems: EP / UP / VE / PUR / PP / PA and caprolactam. LTI I L F I F L , I REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and ar mid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Dep nding on the fibre type, surface weight and angle combination, various mechanical characterist cs can be achieved. SAERTEX products are individually configure for ur customers and optimally ad pted to a range of processe : infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation i the loading direction // Angles of between -22.5° and +22.5° ar possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced compone t weight while maintaining equal mechanical properties or ev n a higher component load with t e same component weight. 3 Individual drapability and outs anding permeability The drap bility of the SAERTEX fabric s tailored to customer requirements and exhibits outstanding permeability // Optim sation and enhancement f the SAERTEX fabrics for infusio processe . 4 Cost avings due to fewer layers Reduction of the manufacturing cost (fewer layers are required thanks to h higher a ea weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin sy tems: EP / UP / VE / PUR / PP / PA and caprolactam. ULTI I L FA I ADE OF GL S, A D A ID REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and ar mid, also known as NCFs (no -crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical char cterist cs can be achiev d. SAERTEX products are individually configured for ur customers and optimally ad pted to a range of processe : infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orienta ion are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation i the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal mechanical properties or even a higher compone t load with e same compone t weight. 3 Individual drapability and outs anding permeability The drap bility of the SAERTEX fabric s tailored to customer requirements and exhibits outstanding permeability // Optim sation and enhancement of the SAERTEX fabrics for infusion processe . 4 Cost avings due to fewer layers Reduction of the manufacturing cost (fewer layers are required thanks to the higher a ea weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin sy tems: EP / UP / VE / PUR / PP / PA and caprolactam. LTI I L F I F L , I
Morehead City, NC 252.638.3553 bluewatersupply.com 10 Construction & Repair Composite Materials Construction & Repair Composite Materials | Fiberglass | Coremat Construction & Repair Can be used on hull sides, decks, liners, and small parts with complex style lines and detailing without fear of air entrapment or spring back. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 262.47’ BWS Part Number Description Price BWS BAL33-4433 2mm Coremat R30302 - 39.37” x 262.47’ $875.20 Composite Materials | Fiberglass | Finish Cloth Construction & Repair 125 Yard finishing cloth. • One (1) Ordering Unit is: Each • MinimumOrder Quantity: 1 Roll = 125 Yards BWS Part Number Description Price FINISH 10-OZ 10 oz. Finish Cloth, Plain Weave - 50” x 125 Yards $1,747.47 Composite Materials | Fiberglass | Gun Roving Construction & Repair Fiberglass gun roving composite material. • One (1) Ordering Unit is: Each • MinimumOrder Quantity: 1 Roll = 207 Yards BWS Part Number Description Price CLEAR 131494 Gun Roving, CTC-2400 - 207 Yards $201.47 Composite Materials | Fiberglass | Saercore Saertex SAERcore is our patented product range for closed injection processes such as RTM (Resin Transfer Molding) and RTM light, together with infusion processes. SAERcore delivers an optimized resin flow zone of polypropylene (PP). This causes the resin to flow four times faster – and even five times faster with our special high-flow variant. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 55 Yards BWS Part Number Description Price SRTX SAERCORE450 Core 450/PP180/450, 450G Chop Knit, 180G/M2 - 55 Yards $1,230.77 Composite Materials | Fiberglass | 22 oz. | NC-PLY Texonic NC-PLY is the best choice for 3D reinforcement in closed molding processes. The strictly aligned fibers result in a no-crimp, highly moldable product with a very uniform, print-thru reducing surface. It optimizes resin flow and acts as its own flow media up to the standard 7-layers. Suitable for wet layup lamination. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 82 Yards BWS Part Number Description Price TEX TG-22-N-50/82 22 oz. E-Glass Cloth NC-PLY - 50” x 82 Yards $2,225.71 Composite Materials | Foam | H45 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures. **Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 045H190P2 H45 - 3/4” PFC20 Perforated, 48” x 96” Sheet $298.00 DVNC 045H254P2 H45 - 1” PFC20 Perforated, 48” x 96” Sheet $373.33 DVNC 045H508P2 H45 - 2” PFC20 Perforated, 48” x 96” Sheet $670.48
All prices are subject to change. Please refer to our website for most recent pricing. 11 Construction & Repair Composite Materials Construction & Repair Composite Materials | Foam | H60 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures. **Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 060H127 H60 - 1/2” Plain, 48” x 96” Sheet $210.79 DVNC 060H190 H60 - 3/4” Plain, 48” x 96” Sheet $292.90 DVNC 060H190P2 H60 - 3/4” PFC20 Perforated, 48” x 96” Sheet $326.76 DVNC 060H254 H60 - 1” Plain, 48” x 96” Sheet $375.02 DVNC 060H254P2 H60 - 1” PFC20 Perforated, 48” x 96” Sheet $408.88 DVNC 060H381 H60 - 1-1/2” Plain, 48” x 96” Sheet $539.26 DVNC 060H508 H60 - 2” Plain, 48” x 96” Sheet $705.19 DVNC 060H508P2 H60 - 2” Perforated, 48” x 96” Sheet $739.05 Composite Materials | Foam | H80 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures. **Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 080H063 H80 - 1/4” Plain, 48” x 96” Sheet $162.55 DVNC 080H127 H80 - 1/2” Plain, 48” x 96” Sheet $270.90 DVNC 080H127P2 H80 - 1/2” PFC20 Perforated, 48” x 96” Sheet $285.50 DVNC 080H127PFC H80 - 1/2” PFC Perforated, 48” x 96” Sheet $295.45 DVNC 080H127P2V3G H80 - 1/2” GPC1 Grooved/Perforated, 48” x 96” Sheet $383.50 DVNC 080H190 H80 - 3/4” Plain, 48” x 96” Sheet $377.57 DVNC 080H190P2 H80 - 3/4” PFC20 Perforated, 48” x 96” Sheet $411.43 DVNC 080H254 H80 - 1” Plain, 48” x 96” Sheet $485.93 DVNC 080H254P2 H80 - 1” PFC20 Perforated, 48” x 96” Sheet $519.79 DVNC 080H381 H80 - 1-1/2” Plain, 48” x 96” Sheet $702.64 DVNC 080H381P2 H80 - 1-1/2” PFC20 Perforated, 48” x 96” Sheet $736.50 DVNC 080H508P2 H80 - 2” PFC20 Perforated, 48” x 96” Sheet $952.38 Composite Materials | Foam | HP80 Diab Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. It features high strength and stiffness to weight ratio, even when exposed to high ambient temperatures. Divinycell HP also has excellent chemical resistance, low water absorption and good thermal/acoustic insulating properties. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 080HP063 HP80 - 1/4” Plain High Temp, 40.2” x 81.5” Sheet $160.00 DVNC 080HP095 HP80 - 3/8” Plain High Temp, 40.2” x 81.5” Sheet $213.33 DVNC 080HP127 HP80 - 1/2” Plain High Temp, 40.2” x 81.5” Sheet $252.12 DVNC 080HP127GSP2V3 HP80 - 1/2” Q100 High-Temp GSC30/GPC1, 40” x 40” Sheet $164.71 DVNC 080HP127P2V3G HP80 - 1/2” GPC1 High-Temp, 40” x 81” Sheet $287.12 DVNC 080HP190G HP80 - 3/4” Plain High Temp 40.2” x 81.5” Sheet $352.86 DVNC 080HP190GSP2V HP80 - 3/4” Q100 High-Temp GSC30/GSP1, 40” x 40” Sheet $214.64 DVNC 080HP190P2V3G HP80 - 3/4” GPC1 High-Temp, 40.2” x 81.5” Sheet $387.83 DVNC 080HP254 HP80 - 1” Plain High Temp 40.2” x 81.5” Sheet $453.60 DVNC 080HP254P2V3G HP80 - 1” GPC1 High-Temp, 40.2” x 81.5” Sheet $488.57 DVNC 080HP254GSP2V HP80 - 1” Q100 High-Temp GSC30/GSP1, 40” x 40” Sheet $258.87 Next Day Delivery in NC All NC areas East of Highway 17 receive delivery 5 days a week by Bluewater Supply trucks. Order by 5pm (3pm on Fridays)
Morehead City, NC 252.638.3553 bluewatersupply.com 12 Construction & Repair Construction & Repair • Enables ultra-tough and robust structures • Reduces overall weight • Increases performance in terms of speed, range or payload • Excellent chemical resistance • High temperature resistance Fear no wave diabgroup.com
All prices are subject to change. Please refer to our website for most recent pricing. 13 Construction & Repair Composite Materials Construction & Repair Composite Materials | Foam | H100 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures.**Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 100H127 H100 - 1/2” Plain, 42” x 85” Sheet $304.33 DVNC 100H127P2 H100 - 1/2” PFC20 Perforated, 42” x 85” Sheet $330.69 DVNC 100H190 H100 - 3/4” Plain, 42” x 85” Sheet $407.76 DVNC 100H254 H100 - 1” Plain, 42” x 85 Sheet $510.52 DVNC 100H254P2 H100 - 1” PFC20 Perforated, 42” x 85” Sheet $536.86 DVNC 100H317 H100 - 1-1/4” Plain, 42” x 85” Sheet $614.60 DVNC 100H317P2 H100 - 1-1/4” PFC20 Perforated, 42” x 85” Sheet $640.95 DVNC 100H381 H100 - 1-1/2” Plain, 42” x 85” Sheet $718.67 DVNC 100H381P2 H100 - 1-1/2” PFC20 Perforated, 42” x 85” Sheet $745.02 DVNC 100H508P2 H100 - 2” PFC20 Perforated, 42” x 85” Sheet $951.86 DVNC 100H508 H100 - 2” Plain, 42” x 85” Sheet $925.52 DVNC 100H635 H100 - 2-1/2” Plain, 42” x 85” Sheet $1,132.36 Composite Materials | Foam | HP100 Diab Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. It features high strength and stiffness to weight ratio, even when exposed to high ambient temperatures. Divinycell HP also has excellent chemical resistance, low water absorption and good thermal/acoustic insulating properties. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 100HP190 HP100 - 3/4” Plain High- Temp 41” x 84” Sheet $556.19 DVNC 100HP254 HP100 - 1” Plain High-Temp, 41” x 84” Sheet $695.88 DVNC 100HP381 HP100 - 1-1/2” Plain High Temp 41” x 84” Sheet $977.79 Composite Materials | Foam | H130 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures.**Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 130H190P2 H130 - 3/4” PFC20 Perforated, 38” x 77” Sheet $560.21 DVNC 130H254P2 H130 - 1” PFC20 Perforated, 42” x 85” Sheet $701.24 DVNC 130H381P2 H130 - 1-1/2” PFC20 Perforated, 77.2” x 38.2” Sheet $985.40 DVNC 130H508P2 H130 - 2” PFC20 Perforated, 77.2” x 38.2” Sheet $1,267.43 Composite Materials | Foam | HP130 Diab Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. It features high strength and stiffness to weight ratio, even when exposed to high ambient temperatures. Divinycell HP also has excellent chemical resistance, low water absorption and good thermal/acoustic insulating properties. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 130HP190 HP130 - 3/4” Plain High Temp 37.2” x 76.2” Sheet $707.74 DVNC 130HP381 HP130-1-1/2”PlainHighTemp37.2”x76.2”Sheet $1,268.52 DVNC 130HP508 HP130 - 2” Plain High Temp 37.2” x 76.2” Sheet $1,642.19 Composite Materials | Foam | H200 Diab Divinycell H provides excellent mechanical properties and low weight. It is widely used and has a proven track record in virtually every application area where sandwich composites are employed. It is compatible with most wet resin systems and its low thermal conductivity makes it especially suitable as insulation at low or cryogenic temperatures.**Other Perforation Patterns Available As Special Order** • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 200H508P5 H200 - 2” PFC X2 Perforated, 68.1” x 33.5” Sheet $2,137.19
Morehead City, NC 252.638.3553 bluewatersupply.com 14 Construction & Repair Composite Materials Construction & Repair Composite Materials | Foam | HP200 Diab Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. It features high strength and stiffness to weight ratio, even when exposed to high ambient temperatures. Divinycell HP also has excellent chemical resistance, low water absorption and good thermal/acoustic insulating properties. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DVNC 200HP508 HP200 - 2” Plain High Temp 32.5” x 67.1” Sheet $2,167.93 Composite Materials | Honeycomb Construction & Repair Polypropylene honeycomb core exhibits a unique cell structure. This core has 3 orientations vs. the 2 orientations common with other honeycomb, making its properties more uniform. Each cell has a tubular form and is inherently stable. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price CORE PP-4.75-10-0.5-4X8 1/2” Honeycomb with Veil, 48” x 96” Sheet $135.31 CORE PP-4.75-10-0.75-4X8 3/4” Honeycomb with Veil, 48” x 96” Sheet $179.19 CORE PP-4.75-10-1.00-4X8 1” Honeycomb with Veil, 48” x 96” Sheet $229.19 CORE PP-4.75-10-1.25-4X8 1-1/4” Honeycomb with Veil, 48” x 96” Sheet $297.45 CORE PP-4.75-10-1.5-4X8 1-1/2” Honeycomb with Veil, 48” x 96” Sheet $313.29 CORE PP-4.75-10-2.0-4X8 2” Honeycomb with Veil, 48” x 84” Sheet $214.40 CORE PP-4.75-10-3.0-4X8 3” Honeycomb with Veil, 48” x 96” Sheet $308.33 Composite Materials | Scoreboard Construction & Repair Styrofoam scoreboard is a square edged scoreboard insulation. Measuring 1”, 4’ x 8’ length. Made of polystyrene, can withstand 165° F, with 0.3% water absorption, and 25 psi compressive strength. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price DOW 635001579 1” Dow Styrofoam Scoreboard Insulation $108.05 Composite Materials | PVC Trident PVC Trident PVC Board is a lightweight but durable foam board that is a great alternative for upholstery applications. It has excellent staple and screw retention, superior impact strength and stability, and will not swell or absorb moisture. Smooth finish. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price PVCB 12UNSANDWHT 1/2” Trident PVC Board 4’ x 8’ Smooth Finish White $317.15 PVCB 34UNSANDWHT 3/4” Trident PVC Board 4’ x 8’ Smooth Finish White $502.86 Expanded PVC - Material Property Test Results Density 0.58 g/cc Tension - ASTM D638-14 Strength 12 Mpa Modulus 750 Mpa Flexural - ASTM D790-17 Strength 23 Mpa Modulus 1050 Mpa ASTM D1761-12 Screw 670 lbs/in Nail 90 lbs/in Hardness 53 Shore D Physical properties of plastic sheeting are represented as “Typical”. Information contained herein is considered accurate to the best of our knowledge. It is offered for your consideration and investigation, and is not to be construed as a representation or warranty expressed or implied.
All prices are subject to change. Please refer to our website for most recent pricing. 15 Construction & Repair Composite Materials Construction & Repair Composite Materials | Coosa | Fiber Board | Bluewater Coosa Composites The Bluewater Panel is Coosa Composites’ premier product. Bluewater is a high density, closed-cell polyurethane foam reinforced with woven roving and continuous strand fiberglass that can be utilized for multiple applications. Bluewater’s dual reinforcement with woven roving fiberglass and continuous strand fiberglass provides additional flexural strength (stiffness) for demanding applications where structural integrity and/or greater span lengths are appropriate. Coosa Composites’ panels do not attract mold or fungus, offer a very low water absorption, 1.5% or less, are very user friendly and can be worked with normal woodworking tools. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Panel BWS Part Number Description Price COOS BLUEWATER-20-1/2 1/2” Fiber Board, 20 lb. Bluewater - 4’ x 8’ $306.02 COOS BLUEWATER-20-3/4 3/4” Fiber Board, 20 lb. Bluewater - 4’ x 8’ $375.55 COOS BLUEWATER-20-1-1/2 1-1/2” Fiber Board, 20 lb. Bluewater - 4’ x 8’ $601.30 COOS BLUEWATER-26-1/4 1/4” Fiber Board, 26 lb. Bluewater - 4’ x 8’ $308.89 COOS BLUEWATER-26-1/2 1/2” Fiber Board, 26 lb. Bluewater - 4’ x 8’ $417.83 COOS BLUEWATER-26-3/4 3/4” Fiber Board, 26 lb. Bluewater - 4’ x 8’ $449.36 COOS BLUEWATER-26-1 1” Fiber Board, 26 lb. Bluewater - 4’ x 8’ $533.21 COOS BLUEWATER-26-1-1/2 1-1/2” Fiber Board, 26 lb. Bluewater - 4’ x 8’ $807.70 Composite Materials | Coosa | Fiber Board | Nautical Coosa Composites Coosa Composites’ Nautical Panels are manufactured from high density, closed-cell polyurethane foam reinforced with continuous strand fiberglass and can be utilized for multiple applications. The Nautical Panel is a highly-economical, superlightweight, and glass-reinforced panel. Density of 15 pounds per cubic foot. Typically used as a core or low-stress semistructural component. 61% or more, lighter than plywood. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Panel BWS Part Number Description Price COOS NAUTICAL-15-1/2 1/2” Fiber Board, 15 lb. Nautical - 4’ x 8’ $285.96 COOS NAUTICAL-15-3/4 3/4” Fiber Board, 15 lb. Nautical - 4’ x 8’ $336.85
Morehead City, NC 252.638.3553 bluewatersupply.com 16 Construction & Repair Composite Materials Construction & Repair Composite Materials | Simona | Boat Board Simona American Industries Simona HDPE Boat Board is a high density material that offers high heat stability and high impact strength for industrial use. Proven for use in marine applications, this versatile material is ideal in areas where weather and rain can occur. Available in the industry’s most popular colors for boating and outdoor living. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Sheet BWS Part Number Description Price BOARD 1/4-BLK-FULL 1/4” HDPE Textured 2-Side, 96” x 54” - Black $196.88 BOARD 1/4-BLK-HALF 1/4” HDPE Textured 2-Side, 48” x 54” - Black $122.25 BOARD 1/4-BLK-QTR 1/4” HDPE Textured 2-Side, 27” x 48” - Black $61.25 BOARD 1/4-WHT-FULL 1/4” HDPE Textured 2-Side, 96” x 54” - White $196.88 BOARD 1/4-WHT-HALF 1/4” HDPE Textured 2-Side, 48” x 54” - White $122.25 BOARD 1/4-WHT-QTR 1/4” HDPE Textured 2-Side, 27” x 48” - White $61.25 BOARD 1/2-BLK-FULL 1/2” HDPE Textured 2-Side, 96” x 54” - Black $423.00 BOARD 1/2-BLK-HALF 1/2” HDPE Textured 2-Side, 48” x 54” - Black $236.50 BOARD 1/2-BLK-QTR 1/2” HDPE Textured 2-Side, 27” x 48” - Black $118.25 BOARD 1/2-WHT-FULL 1/2” HDPE Textured 2-Side, 96” x 54” - White $423.00 BOARD 1/2-WHT-HALF 1/2” HDPE Textured 2-Side, 48” x 54” - White $236.50 BOARD 1/2-WHT-QTR 1/2” HDPE Textured 2-Side, 27” x 48” - White $118.25 BOARD 3/4-BLK-FULL 3/4” HDPE Textured 2-Side, 96” x 54” - Black $634.50 BOARD 3/4-BLK-HALF 3/4” HDPE Textured 2-Side, 48” x 54” - Black $342.25 BOARD 3/4-BLK-QTR 3/4” HDPE Textured 2-Side, 27” x 48” - Black $171.13 BOARD 3/4-WHT-FULL 3/4” HDPE Textured 2-Side, 96” x 54” - White $634.50 BOARD 3/4-WHT-HALF 3/4” HDPE Textured 2-Side, 48” x 54” - White $342.25 BOARD 3/4-WHT-QTR 3/4” HDPE Textured 2-Side, 27” x 48” - White $171.13 BOARD 1-BLK-FULL 1” HDPE Textured 2-Side, 96” x 54” - Black $787.50 BOARD 1-BLK-HALF 1” HDPE Textured 2-Side, 48” x 54” - Black $393.75 BOARD 1-BLK-QTR 1” HDPE Textured 2-Side, 27” x 48” - Black $355.00 BOARD 1-WHT-FULL 1” HDPE Textured 2-Side, 96” x 54” - White $787.50 BOARD 1-WHT-HALF 1” HDPE Textured 2-Side, 48” x 54” - White $393.75 BOARD 1-WHT-QTR 1” HDPE Textured 2-Side, 27” x 48” - White $355.00
All prices are subject to change. Please refer to our website for most recent pricing. 17 Construction & Repair Construction & Repair Flatness We own flat. It’s our guarantee - so you don’t have to deal with curling or a bowed sheet. That means less handling during machining, more precise cuts and less sheet waste. Color Consistency With our advanced color management systems, you can depend on consistent color from order to order. Texture BOATBOARD has a tighter matte texture, which makes it easier to secure to the routing table and provides a greater level of scratch resistance. ONE GROUP. MORE MARINE POLYMER SOLUTIONS. simona-americagroup.com/marine Discover the Difference Find out how BOATBOARD® outperforms other marine HDPE. Vinyl Foam Composite with a Leather Texture ABS Visit www.simona-america.com This in-line laminated multi-layer vinyl/ABS sheet system will decrease your production time and labor costs by eliminating the additional step of hand-wrapping vinyl over a thermoformed part. Achieve a durable, leather-like look and feel with no need for adhesives, glues or paints. Available in more than 16 color and texture combinations. Visit www.simona-pmc.com. Introducing OneStep Vinyl/ABS MAKE VINYL FORMED PARTS IN ONE STEP
Morehead City, NC 252.638.3553 bluewatersupply.com 18 Construction & Repair Laminating Consumables Construction & Repair Laminating Consumables | Films & Fabrics | Infusion Mesh | Pro-Vac PRO-VAC Pro-Vac High-Flow Infusion Mesh is an extruded PE grid mesh. Recommended for flat panels and single curvature molds due to the stiffness of the material. Compatible with all standard epoxy, polyester, and vinyl ester resin systems. A faster flowing mesh compared to the standard knitted types. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 164’ BWS Part Number Description Price PVAC PV-53 High Flow InfusionMesh - 4’ x 164’ $705.52 Laminating Consumables | Films & Fabrics | Infusion Mesh | Pro-Vac PRO-VAC Pro-Vac Low-Flow Infusion Mesh is a 160 gsm 3D PE knitted mesh, compatible with all standard epoxy, polyester, and vinyl ester resin systems. Slower flow, economical, black “shade cloth”. For all geometries of composite structures. Drapes and conforms easily to compound shapes. Can also be used as a reusable breather for debulking at room temperature. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 328’ BWS Part Number Description Price PVAC PV-50-2 Low Flow Infusion Mesh - 6.5’ x 328’ $1,738.76 Laminating Consumables | Films & Fabrics | Infusion Mesh Construction & Repair 5153 Infusion Flow Green medium works well with polyester, vinyl ester and epoxy resins. This product does not fray or roll up at the ends when cut. Resin flows more easily throughout your lay-up, when using 5153 infusion flow green during infusion or the VARTM (Vacuum Assisted Resin Transfer Molding) process. . • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 350’ BWS Part Number Description Price NORT VP-GRNMSH-TSD-ROL-N C 5153 Infusion Flow Green - 42” x 350’ $512.75 Laminating Consumables | Films & Fabrics | Bag Film Construction & Repair NBF-120 is a tough multilayer nylon/ polyethylene based vacuum bagging film designed for processing of advanced composite structures such as boat hulls and decks. The film is ideal for use in polyester/vinyl ester resin infused applications with a maximum recommended temperature use of 248°F. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 245’ BWS Part Number Description Price NORT BF-120393-003-SHT Vacuum Bagging Film, 10 Mil x .003 - 245’ $1,532.16 Laminating Consumables | Films & Fabrics | Bag Film Construction & Repair Stretch-Vac™ 2000 is a transparent red, soft, high-elongation, heat stabilized, coextruded film, produced from a modified polyamide resin. It easily conforms to complex contours and can be heat seamed to meet customer’s requirements. StretchVac™ 2000 is formulated to be less affected by environmental changes and remain flexible in low humidity conditions. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 1000’ BWS Part Number Description Price NORT BF-SV2000-622-VST Vacuum Bagging Film, High Elongation, .002” x 62” x 1000’ $2,113.63 Laminating Consumables | Films & Fabrics | Bag Film | Pro-Vac PRO-VAC Pro-Vac General Purpose Vacuum Bag Film is excellent for use with polyester and epoxy infusion systems, and in the production of large, complex parts. It’s a tough, puncture resistant co-extrusion of polyolefin and nylon based resins. Due to its structure, this product is less sensitive to deviations in humidity than other popular vacuum bag films. This film is designed for the low-temperature composite processing. The film’s range is appropriate for use with composites from small-scale automotive parts to large resin infusion of yachts. Use in the production of epoxy and polyester/vinylester resin-infused components. Green, low-temperature, coextruded, PO/PA/PO vacuum film. Maximum use temperature of 120°C (248°F). • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll BWS Part Number Description Price PVAC PV-150-2 Vacuum Bagging Film, 6.5’ x 1312.3’ $1,365.52 PVAC PV-150-4 Vacuum Bagging Film, 13.1’ x 656.1’ $2,913.10 PVAC PV-150-6 Vacuum Bagging Film, 19.6’ x 410.1’ $2,731.03 PVAC PV-150-8 Vacuum Bagging Film, 26.2’ x 262.4’ $2,321.38 PVAC PV-150-12 Vacuum Bagging Film, 39.3’ x 98.4’ $1,470.21 PVAC PV-150-16 Vacuum Bagging Film, 52.4’ x 98.4’ $1,957.24
bluewatersupply.comRkJQdWJsaXNoZXIy MzI5NTg=