*Below water line connections - recommend double clamping and sealing compound. **Wet exhaust hose connections - recommend double clamping with stainless steel T-bolt or Constant-Torque clamps. Nomex®is a Trademark of e.i. DuPont. CONDUIT VENT DUCT POTABLE WATER SANITATION MARINE WATER BILGE & LIVE WELL & DRAIN NAME–PART#–IMAGE DESCRIPTION 3 YEAR WARRANTY TRIDENT VAC X.H.D. SANITATION HOSE - FDA 148 TRIDENT CLEAR PVC TUBING- FDA 150 2 YEAR WARRANTY 5 YEAR WARRANTY TRIDENT SANI SHIELD SANITATION HOSE 102/101 3 YEAR WARRANTY TRIDENT HD REINFORCED PVC - FDA 161 2 YEAR WARRANTY TRIDENT VAC - H.D. BILGE & LIVE WELL HOSE 144 1 YEAR WARRANTY TRIDENT BILGE HOSE 120/121 1 YEAR WARRANTY TRIDENT WIRE HARNESS CONDUIT 128/128W 1 YEAR WARRANTY TRIDENT PVC VENT DUCT 400/402/406 3 YEAR WARRANTY TRIDENT VAC - X.H.D. BILGE & LIVE WELL HOSE 149/147 2 YEAR WARRANTY TRIDENT REINFORCED PVC - FDA 164/162 1” 1-1/2” 1-7/8” 2” 25.4mm 38mm 48mm 51mm Black or White w/Green Stripe 50’ (15m) Coil 12.5’ (3.8m) Length (Boxed on request) 5/8” & 1-1/2” Clear with Black Helix Bulk Box: 1000’ to 150’ (305 - 46m) 50’ (15m) Boxed 16mm to 38mm 5/8” to 1-1/2” 16mm to 38mm 6.3mm to 38mm White 100’ (30.5m) Coil 50’ (15m) Coil 50’ (15m) Boxed 25’ (7.6m) Boxed 1/4” to 1-1/2” Clear Coils: 250’ to 1” (76m- 25mm) 100’ to 1-1/2” (30.5m- 38mm) Boxed: 100’ (30.5m) 50’ (15m) 25’ (7.6m) 1/4” to 1-1/2” 6.3mm to 38mm Clear 250’ to 1”(76m-25mm)Coil 100’ to 1-1/2”(30.5m-38mm) Coil 50’ (15m) Boxed 3/8” to 1” 9.5mm to 25.4mm 250’ (76m) Coil 50’ (15m) Boxed 25’ (7.6m) Boxed #164 White with Blue Tracer #162 Clear with Blue & Red Tracer Premium Sanitation Hose for all head & holding tank connections. Extra thick tube & cover is specially formulated Black or White EPDM Rubber for Max. Resistance to Odor Permeation and winterizing with antifreeze. With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention. This makes for easy installations with no heat gun or lubricant necessary. It’s Legendary odor-free performance is the best on the market. Self draining installations still recommended. Not for potable water. NOW AVAILABLE IN WHITE. Extra heavy duty sanitation hose of smooth white vinyl. Specially compounded to provide resistance to odor permeation and (FDA) potable water fill. Also for critical bilge, drain scupper, live well, etc. Hard PVC helix gives good flexibility and bend radius. No cuffs required.* Don’t use with alcohols, anti freeze, petro-chemicals or solvents. Self draining installations are necessary for odor free service. Operating temperatures +10° to +140° F (-12˚ to +60˚C). CA prop 65 Compliant. Non-toxic FDA compounded PVC for many unpressurized, cool water uses like fresh water, drain and vent lines. Operating temperatures +20° to +150° F (-7˚ to +66˚C). NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. CA prop 65 Compliant. Nylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #164 “Cold Water”. Max W.P. depending on I.D. size @ 70°F (21˚C): #162=175 PSI (1.21Mpa), #164=150 PSI (1.03 Mpa). Operating temperatures +20° to +150° F (-7˚ to +66˚C). NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. CA prop 65 Compliant. Heavy duty non-toxic FDA compounded PVC with nylon reinforcement. For pressurized drinking water systems and many other uses. Resists odor, taste and up to 250 PSI/WP (depending on I.D. size) @ 70°F (21˚C). For cold and hot tap water. Operating temperatures +20° to +150°F. (-7˚ to +66˚C) Good flexibility and bend radius.* CA prop 65 Compliant. Heavy duty bilge, drain and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12˚ to +60˚C). CA prop 65 Compliant. Smooth extra heavy wall vinyl hose. 147 is all clear (FDA) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures +10° to +140° F (-12˚ to +60˚C). CA prop 65 Compliant. 149-Black–”Extra Flexible” Extremely flexible corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and sea water. NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. Operating temperatures -40° to +200° F (-40˚ to +93˚C). Corrugated Polypropylene Conduit Hose. Safe and easy to install for multi-wire harness, cable & hose routing (like transom to O/B engine), and other applications. New ABYC Electrical Standard E-11 applies to all boats with AC or DC systems. Slit or Unslit. Fire Retardant/Self Extinguishing Polypropylene. Meets UL 94 V-2 as per ABYC E-11.16.4.1.9. 128W-White for easier location of wiring short circuit burn out. Wire supported vinyl ducting resists weather, sunlight and ozone. Won’t support flame. 400-402 - Stand. vent ducting 3 mil. 406 H.D. Vent ducting 6 mil. Operating temperatures 0° to +160°F (-18˚ to +71˚C). Bulk Box: 500’ to 150’ (152- 46m) 50’ & 100’ (15m & 30m) Boxed #120 White #121 Black 1/4” to 2” 6.3mm to 51mm 76mm & 102mm Black w/ Blue Stripe or White 50’ (15m) Boxed 3” & 4” #400 White #402 Black #406 Black #147 Clear with Black Helix #149 Black 3 YEAR WARRANTY TRIDENT ODOR SHIELD SANITATION HOSE 140 1” & 1-1/2” 25.4mm & 38mm Very Light Grey 100’ (30.5m) Coil 50’ (15m) Boxed 100’ (30.5m) Coil 50’ (15m) Boxed 100’ (30.5m) Coil 50’ (15m) Boxed Extra odor-resistant sanitation hose for all head and holding tank connections. This smooth vinyl light grey hose has a special thermoplastic formulation that exceeds the odor resistance of our popular 148 series. The hard PVC helix gives the same good flexibility and bend radius. No cuffs required. Not for potable water applications, or for exposure to alcohol, petrochemicals or solvents. Self draining installations are necessary for longest odor free service. Max. operating temps. +10˚ to +140˚F (-12˚ to +60˚C). Max working pressure 70 PSI (0.48 Mpa). CA prop 65 Compliant. 5/8” & 1-1/2” 16mm to 38mm 5/8” & 1-1/2” 16mm to 38mm I.D. SIZE COLORS PACKAGING COLOR CODE 2/3 YEAR WARRANTY TRIDENT H.D & X.H.D. WATER/AIR HOSE (SAE J20R3) 132/134 1/4” to 1-1/2” 6.3mm Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized application (water & air delivery) #132 is 2 spiral, 200PSI (1.38Mpa) W.P. #134 has 4 spiral, heavy wall and better bend radius and working pressure. 300 PSI (2.1Mpa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C) #134 serves below water line intake and discharge applications (A/C, Eng, Sani) etc. Black REELS 750’-250’ (230-75m) Boxed 50’ (15m) HEAVY WALL www. t r i den tma r i ne . c om Blue A/C DUCTING 3” to 8” 76 to 203 50’ (15m) Lengths Boxed Trident Polyduct – The most flexible, crush proof and rugged blower duct hose for Heat, Ventilation and Air Conditioning (HVAC). Heavy Duty polypropylene hose, reinforced with a flexible polypropylene rod helix. It has excellent flexibility & compressibility; and excellent resistance to crushing, flex fatigue, tearing, and moisture . Stomp on it and it returns to shape without damage. Shove it thru tight openings and overheads and it delivers full air flow. Meets FMVSS 302 flame resistance, Temp. Range: -40°F to +225°F (-40°C to 107°C). when insulated 3 YEAR WARRANTY TRIDENT POLYDUCT 481 STAINLESS STEEL T-BOLT EXHAUST CLAMPS & CONSTANT TORQUE CLAMPS 5/8” to 18” 16mm to 457mm Solid Stainless Steel 12/ Bag As Required 25/Box Trident T-Bolt Clamps: 3/4” (19mm) Wide, 316 Stainless Steel band & 18-8 Stainless Steel T-Bolt & Lock Nut (with nylon insert). Very strong and secure for critical applications. Constant Torque Clamps: All 300 Stainless Steel 5/8” (16mm) wide band, liner, housing, screw and Bellville Springs. 7/8” (22mm) OD Range. Automatically expands and contracts to compensate for heat, cold & compression set. 720 730 CLAMPS 165 6 Nylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #165 “Cold Water”. Max W.P> depending on I.D. size @70˚F (21˚C): #165 = 175 PSI (1.21Mpa), #166 = 150 PSI (1.03 Mpa). Operating tempuratures +20˚ to 150˚ F (-7˚ to +66˚C). T REC E E F R EL ATERLI E T R - LL C ECTI NS. CA prop 65 li t. #165 Translucent Blue 6 Tr nslucent Red
RkJQdWJsaXNoZXIy MzI5NTg=