All prices are subject to change. Please refer to our website for most recent pricing. 27 Construction & Repair Epoxy - Epoxy Construction & Repair Resin Hardener Mix Ratio (by Volume) Initial Mixed Viscosity Gel Time (150 grams at 77°F) Tint Color (Drum kits only) HDT 1 (Heat Distortion Temperature) 4281A 4284B 4 to 1 180 cP 45 minutes Red 171°F 1 4286B 4 to 1 260 cP 80 minutes Blue 200°F 1 9265B 3 to 1 280 cP 105 minutes Green 201°F 1 9227B 3 to 1 280 cP 130 minutes Yellow 180°F 1 9297B 3 to 1 280 cP 225 minutes N/A 196°F 1 9250B 3 to 1 280 cP 280 minutes Blue 196°F 1 9226B 3 to 1 275 cP 480 minutes Blue 170°F 1 Medium Temperature Infusion and Injection systems for use when medium heat distortion temperature is needed. Room Temperature For use when infusing or injecting parts/hulls that do not need high heat distortion temperature Resin Hardener Mix Ratio (by Volume) Initial Mixed Viscosity Gel Time (150 grams at 77°F) Tint Color (Drum kits only) HDT 1 (Heat Distortion Temperature) 2110A 9292B 2.5 to 1 300 cP 60 minutes Green 160°F 1 9283B 2.5 to 1 250 cP 180 minutes Yellow 160°F 1 4364B 2.5 to 1 250 cP 360 minutes Indigo 160°F 1 9287B 2.5 to 1 200 cP 600 minutes Blue 150°F 1 High Temperature Infusion and Injection systems for use when high heat distortion temperature is needed. High Temperature Toughened Infusion and Injection systems for use when high heat distortion temperature and is enhanced strength is needed. 1 Ultimate HDT listed, elevated post cure required. 1 Ultimate HDT listed, elevated post cure required. Resin Hardener Mix Ratio (by Volume) Initial Mixed Viscosity Gel Time (150 grams at 77°F) Tint Color (Drum kits only) HDT 1 (Heat Distortion Temperature) 2110A 9232B 4 to 1 620 cP 75 minutes Green 292°F 1 9235B 3 to 1 300 cP 110 minutes Yellow 286°F 1 9231B 2.33 to 1 500-700 cP 500 minutes Indigo 310°F 1 1 Ultimate HDT listed, elevated post cure required. Resin Hardener Mix Ratio (by Volume) Initial Mixed Viscosity Gel Time (150 grams at 77°F) Type HDT 1 (Heat Distortion Temperature) 4505A 9239B 4 to 1 400-600 cP 60 minutes Fast 242°F 1 4507B 3 to 1 700-800 cP 120 minutes Medium 257°F 1 9231B 2.5 to 1 900 cP 360 minutes Slow 285°F 1 Infusion and Injection Epoxy Resin Systems 1 Ultimate HDT listed, elevated post cure required. Resin Hardener Mix Ratio (by Weight) Initial Mixed Viscosity Gel Time (150 grams at 77°F) Type HDT 1 (Heat Distortion Temperature) 4358A 4358B 100A : 50B 700 cP 40-45 minutes Laminating 150°F 9425A 9425B 100A : 40B 700 cP 8 hours Thixo Laminating 170°F 1 4356A 4356B 100A : 54B 6,700 cP 140 minutes Adhesive/Casting 150°F 1 Potable Water Tank Epoxy Resin Systems Potable water tanks should be constructed with materials that meet the Federal Guidelines as outlined in the Code of Federal Regulations 21 Parts 170-199 to assure safety in the drinking water from possible residue from the construction materials. Tanks built with materials that meet these requirements (fibers, etc.) along with our epoxy systems below should be eligible for certification by NSF in the full laminate form.
RkJQdWJsaXNoZXIy MzI5NTg=