All prices are subject to change. Please refer to our website for most recent pricing. 19 Construction & Repair Laminating Consumables Construction & Repair Laminating Consumables | Spiral Wrap Spiral Wrap Polyethylene plastic tubing is spirally-cut for wrapping multiple lines into one manageable bundle while protecting against wear and damage. A single line can be pulled from the bundle at any point, in any direction, allowing for versatility and flexibility. Also very useful for disseminating resin during the vacuum bag laminating process. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 100’ BWS Part Number Description Price PAND T50F-C Clear Poly Spiral Wrap - 1/2” x 100’ $232.80 PAND T75F-C Clear Poly Spiral Wrap - 3/4” x 100’ $283.56 HUD LLDPE-SPIRA-1/2 SpiralWrap, 0.052Wall Thickness - 1/2” x 100’ $41.64 HUD LLDPE-SPIRA-5/8 SpiralWrap, 0.052Wall Thickness - 5/8” x 100’ $54.40 Laminating Consumables | Fitting | Nylon US Plastics Nylon Barb Fittings are used to connect polyethylene tubing and/or spiral wrap together, to make your network of vacuum infusion lines to the laminate. “Barbed” ends enable a secure union with only a press fit. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Fitting BWS Part Number Description Price USP 62763 Nylon Elbow - 1/2” x 1/2” $2.13 USP 62764 Nylon Elbow - 5/8” x 5/8” $2.27 USP 62765 Nylon Elbow - 3/4” x 3/4” $2.90 USP 64034 Nylon “T” - 1/2” x 1/2” x 1/2” $2.32 USP 62827 Nylon “T” - 5/8” x 5/8” x 5/8” $2.46 USP 62828 Nylon “T” - 3/4” x 3/4” x 3/4” $2.82 Laminating Consumables | Fitting | Valve PRO-VAC A polyethylene double O-ring infusion valve. Can be used up to 212°F. • One (1) Ordering Unit is: 25 Pieces • Minimum Order Quantity: 1 Pack BWS Part Number Description Price PVAC PV-70-12 Infusion Valve 12 mm (.47”) $107.53 PVAC PV-70-18 Infusion Valve 18 mm (.71”) $122.36 Laminating Consumables | Fitting | “T” PRO-VAC A polyethylene T-shaped connector for resin infusion. Can be used up to 212°F. • One (1) Ordering Unit is: 50 Pieces • Minimum Order Quantity: 1 Pack BWS Part Number Description Price PVAC PV-76-12 “T” Connector 12 mm (.47”) $48.20 Laminating Consumables | Resin Feed | Elevated PRO-VAC A steel coil resin feed wrapped in Pro-Vac Low-Flow Infusion Mesh (PV-50). This allows the resin feed to be elevated about the part when under vacuum to prevent part imperfections caused by resin feed lines. Can be used up to 250°F. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Feed BWS Part Number Description Price PVAC PV-68-40 Elevated Resin Feed - 40’ $160.50 Laminating Consumables | Resin Feed | Enka® PRO-VAC Enka 3D matrix infusion channel for fast resin flow. Increases efficiency and reduces infusion time. Provides steady flow speeds over large surfaces. Maximum use temperature of 302°F. • One (1) Ordering Unit is: Each • MinimumOrder Quantity: 1 Feed = 328’ BWS Part Number Description Price PVAC PV-66-50 Enka® Resin Feed - 2” x 328’ $433.82 PVAC PV-66-100 Enka® Resin Feed - 4” x 328’ $556.17 Laminating Consumables | Tacky Tape | Sealant Tape Construction & Repair Tacky Tape SM5142 is a sealant tape designed for vacuum bagging and autoclave operations. Its aggressive initial tack can maintain an air-tight seal during the cure cycle, yet strip clean from the tool, with virtually no trace of residue. • One (1) Ordering Unit is: Each • Minimum Order Quantity: 1 Roll = 25’ BWS Part Number Description Price NORT ST-SM5142-400-BYL Tacky Tape, Yellow - 1/2” x 1/8” x 25’ $9.96
RkJQdWJsaXNoZXIy MzI5NTg=